Here’s a detailed explanation on how to remove links from a Fossil smartwatch:
- First, identify whether your Fossil smartwatch has a link bracelet or a Tubelink bracelet. A Tubelink bracelet has a small tube connecting the links, while a link bracelet has pins connecting the links.
- Source: Smartwatch Adviser
- If your Fossil smartwatch has a link bracelet, you will need a pin removal tool to remove the pins that connect the links.
- Source: Target Watches
- If your Fossil smartwatch has a Tubelink bracelet, you will need a punch tool and a metal hammer to remove the tube that connects the links.
- Source: Gorilla Fitness Watches
- Here are the general steps to remove links from a Fossil smartwatch:
- First, identify which links you want to remove to adjust the size of the bracelet.
- Use the appropriate tool (pin removal tool or punch tool) to push out the pin or tube that connects the links.
- Remove the links from the bracelet.
- Reconnect the remaining links and make sure the bracelet fits comfortably.
- Source: Smartwatch Adviser
- If you don’t have the necessary tools, you can take your Fossil smartwatch to a jeweler or watch repair shop to have the links removed.
- Source: Target Watches
Additional Information – How To Remove Links From Fossil Smartwatch
How to Remove Links From a Fossil Smartwatch
How to remove links from a fossil smartwatch is relatively easy. The first thing you have to do is figure out how many links you have to remove. You can do this by measuring the length of the watch strap. If it does not fit, you should measure the number of extra links, and then unscrew them. This will allow you to pull out the entire link. Once you have removed all of the links, you can simply reattach the strap to the fossil.
Once you have removed all of the links from your fossil smartwatch, you can attach the remaining pieces. To do this, you need to place the screws side by side, and then screw them in place. Alternatively, you can use a thumbtack as a replacement for a pin tool. A tool kit designed for jewelers will help you shorten watches. These can be found online, and they are inexpensive. Make sure you’re working in the right environment with the right lighting.
To remove the links from your fossil smartwatch, you should first determine how many links you need to loosen. Each link is attached to the other by screw pins, or split pins. To remove these, you need to hold the links together and insert the pin into the bracelet. Carefully drive the pin into place, then unplug the fossil smartwatch and insert it into your wrist. As the pin is already attached to the bracelet, you can now unfasten the other links on the wristwatch.
Fossil Smartwatch Links (Without Tools): Remove
Step 1: Get the Tools You Need. In truth, these are essential tools for adjusting your watch strap. Yes, these tools don’t need to be special. These tools do not require special skills. Ideally, medium-sized needle-nose and paper clips are used frequently in the home. A medium-sized paperclip fits into the holes of your straps perfectly. Look for the arrow marks on your straps. This will indicate the direction you should cut the paperclip to remove the pin from the hole. Then hold the cut piece of paper and place it into the slot. Step 3: Remove the Pin from the Watch Strap. Now, take your needle-nosepliers out and make a few knocks on the paper pin using the flat side. You will see the pin come out of the link. You can now remove the pin using your needle-nosepliers without any damage. You can repeat the procedure to take out the pin on the opposite side. Continue this procedure until your watch is exactly fitted. Pop the pin that connects the two ends of your watch strap. Next, place the watch with the arrow facing up. Give the flat end of the needle-nosepliers a few gentle taps.
How to take the watch link from your watch strap
Smartwatches are not universally compatible. Your wrists may be smaller than normal, and your smartwatch might hang off your wrist or slide up to your arm. It’s not a problem that is uncommon. It’s possible that there’s at least one or two too many chains on the strap. However, adjusting a smartwatch with metal links is easy and not as complicated as it seems.
How to Remove Links from a Fossil Smartwatch for a Screwed Pin
Hold the link from the side, using your fingers. You can move the screwdriver slowly to the left in an anticlockwise direction. When it starts moving upwards, loosen the grip and let it go. This is also applicable to the left end of the link.
Fossil watches with pin and tube links
The watch bracket is not equipped with arrows. It only has a tube bracelet and a pin. This type of link can be removed from any direction. A bracket holder and punch tool are also required. Here’s how you do it. Repeat the process for the second part.